Description

This is an STL file for 3D printers, a digital file only. You will receive the download link once you complete checkout;)

I’d recommend printing no smaller than 0.12, using 0.4 nozzle, 10% infill at least and fairly slow. It does need supports but you can get away with tree supports with 0 infill.

Print him at 56mm tall if you want to use 6mm cabochon eyes and 75 mm if you would like to use 8mm cabochon eyes:)

I usually print him with 3 walls and 15% infill.  For support choose a minimal setting (like snug for Bambu printers) and increase the top z distance a little. He only needs support for his paws.

I recommend using Tamiya Model Paints to paint him up and Julie Wang cabochon eyes:)